Great value, fast delivery. Perfect match for Cherry Cabinets. Here is my way of getting a perfect center every time. I took two #8-32 screws (not ones with pulls but two that I had one inch long. I cut the head off and ground a point on one end then screwed them into one pull which I used for each drawer and door. Locate where you are installing the pulls. I used a machinist square and set the distance from the top to where to drill the top hole. Place the point of the top screw on this mark on the door and center the bottom screw. Press the points into the wood to mark where to drill. Drill clearance holes from front of the door slowly as not to split the hole in the inside. I made the first hole 3" from the top of the doors. On the drawers, center the pulls top to bottom and left to right on drawers.
By Mary F.
from Corpus Christi, TX
on Mar 08, 2011
It was not stated anywhere that there were 2 hinges per package. I have several large cabinet doors needing 3 hinges, so it was not automatic to believe we need 2 per door. I ended up ordering TWICE as many as needed.
The product was exactly what it was supposed to be. There were no surprises. I searched for cabinet door pulls on a lot of websites without success.The best thing about yours is the ease of sorting by specifications to find exactly what will work for a particular project. I was very pleased and with some paint and new pulls, we have a beautiful piece of furniture.
Used this to carry a theme from my kitchen to laundry/sewing room. Originally thought they were too light for our blond french country look cabinets. However, we experimented by applying a darker gel stain. They turned out just what we wanted. Wish this was offered in a longer version for large doors.
By Connie D.
from Highlands Ranch, CO
on Aug 24, 2010
These pulls look nice from the front, but the screw holders on the back are VERY poorly made (messy solder, not reliably the correct distance apart, screws don't always fit). I'm not expecting them to last very long. It's a shame because I spent a lot of time refinishing the vintage desk I bought the pulls for, and non-standard size pulls are hard to find. Sorry, but I recommend you keep looking, and go for a different manufacturer.
This is a replacement knob for the ones I currently have. This is a nice clear acrylic knob that has a strong base. The old ones that it replaced had a weak acrylic base and I have broken several right at the base. They just crack off after a while This one is reinforced with steel. I have used this one on one of my cabinets and it has held up several years.
I was very pleased with the quality and value! Friends have come to visit and can't get over how beautiful these pulls are. I most certainly would order again and I was also pleased with the promptness of delivery and the careful packaging of the product
Great experience all the way from browsing online to actual purchase. This product was exactly as presented in the detailed information given. The hardware arrived in a very timely manner and everything was received as ordered. Loved FREE shipping and handling! When I compared the expense of replacing my kitchen hardware at a local home improvement center, I was very discouraged with the amount of the product and the fact they didn't have enough of what I needed on hand...so I would have to wait until the received more. I found the exact hardware on this site for almost HALF price! We are enjoying the look of our new hardware and guests say we made a great choice too!
I saw these in the store and liked them. The weight is good they look rich. However they were a bit darker than I saw in the picture and at the store. Too dark especially if combined with Cavilier back plate of the same finish.
The pulls are much nicer looking in person. We built beautiful cherry book shelves with cabinets in a nautical themed office and they really added an elegant finish to them. Received them in record time.
By Bette P.
from Southern California
on Apr 08, 2010
Struggled with locating the "right" knobs and pulls for our kitchen until finding your website. The product description and photos were very accurate and the knobs and pulls that arrived were exactly as advertised and they look great on my cabinets! Thank you!
I purchased an old dresser which I was painting. The old handles were very ornate and dated. I tried locally to purchase replacements. I found my dresser handles were 3 1/2" on center and locally I could only find 3" on center. I was told my a clerk at a large "big box" that I would never find the correct size. Thanks to you, I found them.
Service was fast and the quality is very good. Hinges are very easy to install. I do suggest to us a forestner style bit as it operates like a spinning chisel and gives you a very good starting point with a perfect round hole and flat bottom. Do not use high RPM's, let the chisel do the cutting not the speed.
Bought 35 knobs and 30 would not accept the included screw. 5 broke in the process. As if screws are a different thread than knob. Old screws would not work either. Would not even start to thread. Required cutting new threads to get to work!
Value was excellent. I had to grind down the backs of these so they would mount flat on the post. Manufacturer needs to take a little more time to grind these down from the castings. Otherwise a good product for the value.
I installed these outside next to our hot tub and they are great. Hammered Wrought iron matches most of our hardware throughout the house. Quality was excellent and the best part was functionality. I wanted something that was deep enough to hold a heavy towel or robe. Each hook can easily hold one each or more if needed. Highly recommend. DGP (VA)
I have looked and researched everywhere and usually you are great for items, but these last handles only some were not slightly stratched or rubbed looking. I am thinking of exchanging a few. I wanted a very smooth finish and these look like dinner silverware that has been bounced around a bit.
As for design, they are excellent and for the price they feel heavy enough for quality. I just wish the finish had been brand new looking.
But your website and shipping are great. Just need more spec. info when buying. I would love handles just an inch longer and to get that I have to spend at least 50.00 dollars more as fall as I can tell. Would love some direction on that for future purchases. Thanks, C in MO
By Karl K.
from Marshfield Hills, MA
on Sep 24, 2009
Grass TEC 862 or are P5128-1 3/8 " overlay Euroframe Hinge, does not easily replace the original Grass #830 you have to drill new holes in your door and the adjustment plate is useless, you must modify the original adjustment plate if you know how to do it, also the the closing strenght is less. if you not mechanical inclined, don't buy the # 862 !
You currently have no recommended items. Browse a few more items to give us an idea of what you like.
Sign Up and Save 10%
Don't miss our design tips, savings and special offers! Join the ATGStores.com email list!
You are consenting to receive marketing emails from ATGStores.com. You can unsubscribe any time by using the unsubscribe link in our marketing emails, contacting us at ATG Stores, 11410 NE 122nd Way, Ste. 200, Kirkland WA 98034 or via email at Privacy@atgstores.com.