*This product is a special order item and available to purchase online or by speaking to an associate at this selected store. Choose from store pick-up or home delivery. Standard charges apply for home delivery. (learn more)
Replaced a worn out set of Knape & Vogt slides that were over 30 years old. The dimensions were a perfect match for the model number. Most of the holes on the new slide lined up with the original holes. I would expect that the new slides will add many years of use to an older cabinet.
These work fine, but you need to be aware of this: if you are replacing drawer slides made by the same company in the 1970s these slides could give you some trouble. The screw holes are different, but more importantly the allowable width between the drawer and the cabinet with the older glides was less. So if you do not have more than 1 inch difference (overall cabinet opening width minus the overall drawer width), these simply won''t work. The old slides would work with 7/8 inch or 15/16 inch clearance and these must have at least a bit over 1 inch.
3/4 extension under surface mount drawer slide with
shelf tabs Ball bearing Mounting brackets adjust to 7 different heights and can be reversed for inboard/outboard mounting Track member quickly disconnects using positive level release, easing installation Hold-in feature prevents keyboard ...
Full extension drawer slide Progressive movement on ball
bearings 32mm hole pattern Non-handed quick disconnect drawer members Hold-in feature to prevent bounceback Sold in pairs Materials: Steel