Sale ends 3/26/17. Excludes select manufacturers.
Min. purchase $299.
WCL1923OSD #18 gauge, type 304 (18-8) stainless steel lavatory with 5/32" (4mm) raised rim. Compartment has 1-3/4" (44mm) radius vertical and horizontal coved corners. 2-1/2" (64mm) apron front and both sides. Full length 2-1/2" (64mm) high backsplash. Exposed surfaces are hand blended to a uniform satin luster finish. Underside is sound deadened. Furnished with integral stainless steel support brackets. Rear centered drain outlet. Drain opening size 1-5/8" (41mm). Chrome plated grid strainer with elbow and offset 1-1/4" (32mm) tailpiece. Meets ADA requirements.
LKB721C Sensor-operated, deck-mounted, non-mixing gooseneck faucet with adjustable sensor eyes. A continuous beam is emitted from sensor and faucet is activated when hands are placed under the spout. Water will flow as long as hands remain withinsensor range. When hands are removed, the water stops automatically based on shut-off delay setting. The sensor then resets for the next user. Chrome-plated solid brass construction with 2.0gpm laminar flow control on spout end. Includes water-resistant sensor control module and power cables. Features dual power options: AC plug-in and battery holder with four AA batteries. Slow-closing piston operated solenoid valve, in-line filter with clean out trap and flexible supply hose. Control circuit is solid state, has adjustable sensor range of 7/8" (22mm) to 6-3/4" (171mm), shut-off delay preset at 1 second and field adjustable to 2 seconds (to prevent sink overflow).
LKAD174 Chrome plated brass perforated grid strainer with 1-1/4" (32mm) O.D. offset tailpiece.
MIXING VALVE: LK724 Mechanical mixing valve with C.P. brass body, 3/8" (10mm) compression inlets and outlet connections, and check valves on inlets.
|Listing:||Quick Ship, ADA|
|Spout Reach:||5.65 inches|
|Spout Height:||7.32 inches|
|Mfr Part #:|
|Category:||Commercial Sinks - 550|