By Andrew M. from Rolling Prairie, IN on Jul 13, 2010
Practical, Stylish, Avid Do-It-Yourselfer
My only real complaint is the lamp head unit itself....all of the hardware was loose and I had to tighten everything up so it didn't wiggle/rattle. Associated with that was the studs that were used in holding the lamps bulb housing lids down were too long. The acorn nuts bottomed out before engaging the lid so the lid would rattle when the wind blew. Had to add tiny washers on top of the lids so the acorn nuts would clamp the lids adequately and stop the rattle.