No Lead Two-Level Soft Sides® Sensor-Operated Hands-Free® Wall Mount Water Cooler – Barrier-Free Access
Two-level barrier-free stainless steel water cooler has recessed in-the-wall refrigeration system and stainless steel grill. All stainless steel polished to a satin finish. Sensor-operated wheelchair fountain has unique Hands-Free® operation and automatic flow regulators provide constant stream from 20 to 105 psi. Vandal-resistant bottom cover plates.
NOTE: Minimum 40 psi supply line pressure required in special circumstances where both sides of bi-level are in use simultaneously to ensure adequate stream height. Use of water filter in this situation is not recommended. Energy efficient refrigeration system utilizes a combination tank continuous-tube type evaporator, refrigerant drier, and capillary tube.
This drinking fountain complies with the requirements of the ADA when properly installed. Unit is compliant if installed in an alcove and is compliant when mounted on an exposed wall if a wing wall is located on the left side or if an apron is installed under the upper unit.
No Lead Design: This drinking fountain complies with the lead-free definition in the safe drinking water act of 1986 and lead contamination control act of 1988.
Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free material. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
This water cooler is certified to NSF/ANSI 61.
|Drinking Fountain Installation Type||Wall Mounted|
|Mfr Part #|
|Category||Drinking Fountains - 547|
|Style||Modern - 3|